Pages

Monday, April 12, 2021

Radiators

I decided that to make my Greenleaf McKinley dollhouse a real home versus simply a house, that I needed to add a good old fashioned radiator....or two...or 8.  You know the kind.   The good old fashioned hot water radiant heaters that were so warm and toasty on a cold day!   The place to deal your towel whilst in the bath....and to have a deliciously warm towel.  Ohhh the memories of the smell of drying gloves as they dried atop those warm hunks of metal. 

My dollhouse needs radiators!  So I set to work!!!

I decided to use popsicle sticks (craft sticks).  I started to simple cut and eyeball the measurements I make a prototype.   Once I had the basic idea I had the base pieces I would need to make a radiator.  The number of pieces would be determined by how long I wanted the radiator to be.  

The most annoying piece to work on was the two end pieces for each radiator as I pretty much carved two legs.  Not really difficult...just time consuming. 
The end pieces I literally eyeballed the height and then checked how it looked in the actual dollhouse!  
Once I had my end pieces cut I knew exactly how long to cut the middle portion of the radiators.  They needed to be just a tad shorter....I took the length of the end piece and subtracted the measurements for the legs and I had the perfect size.   I then took some of those pieces and cut them down the middle to create narrow pieces.   I also took the time to round over the tops of the narrow pieces by cutting them a bit and sanding them a lot.   How many did I cut?   Well that depends on how long you want your radiator to be.  

I decided to mass produce my radiators so I just sat down with my exacto knives and small miter saw and started cutting.  Finally I had enough pieces cut and I was ready to start the assembly process.

As you can see above I used the three basic pieces that I described earlier.  The two end pieces for each radiator (the ones with legs) the wide internal pieces and the small narrow  pieces. 

I started by taking my small narrow pieces and gluing two together.  I needed theses pieces to be a bit thicker. 






I walked away from my radiators to allow these pieces to fully dry.  But it wasn’t long before I came back ready to assemble my radiators.

I picked up one of the end pieces of a radiator (the piece with the two legs/feet) and I glued one of my narrow pieces to it (the pieces that I glued together to make a thicker piece). 

I then grabbed a wide piece (one with no legs) and glued that to the narrow piece that I had just added. 

And now you repeat the process by gluing another narrow piece on top of that wide piece.   Be sure to keep everything even at the top.


Repeat the process until you have a radiator the size that you want for your house, alternating wide with narrow pieces.  The very last piece you add will be a wide piece and you will use a wide piece that has legs.

Now it’s time to step away and let everything dry!   Once dry you can paint them to your specifications and you are done...mostly!

I chose to add some water line pipes from the radiators to the floor for an extra touch of realism. I just grabbed some thin gauge wire (from the jewelry making department) and cut it to size...added a little bend and superglued it on!!!!



This was a super easy project to complete!  It was made using items that I had around the house.  It was a fun process!   I am loving the touch of realism it added to my Greenleaf McKinley house!!!


Monday, April 5, 2021

A house versus a home

I have been slowly working on some little things to turn my Greenleaf McKinley into a home.   I have the house.  I need to make it a home!   

I put a call out and got some suggestions and ideas and for that I am so thankful.  It kick started  my thought processes and I was able to get some projects started immediately!

First up, I made some rugs.  I made them in a ‘braided rug‘ style.  I had made some braided rugs for the Log Cabin  a few years ago and I was happy with how they turned out.  So I grabbed some supplies and got to work using the same techniques.  

I made a big rug for the nursery and two small rugs to go beside the bed in the master bathroom.  I also made a rug for the kitchen. 


I didn’t stop at rugs.  No way!  I printed up some book covers and made a few ‘Little Golden Book’ and some Beatrix Potter books for the nursery.  

Now to figure out a book shelf for the nursery.....hmmmmm.

I was sorting through my supplies and stash this past week and I stumbled upon a little round wooden table.  It was unfinished wood but I wasn’t worried about that!  I was more concerned with the size.  Would it fit in the kitchen bay window?  Would it be too big?  I had purchased a perfect table a year or so ago and it was too big for the space....I guess it wasn’t perfect afterall!  (But it did make me dream of another project that WILL be perfect for that table!).   Could the perfect sized table have been in my stash all  along???  I put it into place and it seemed to work.  Could a girl get so lucky?   I didn’t want a wood table though.  But that’s not a problem!  I pulled out my paint!

First up the whole paint got a few coats of white paint!

Next up was some red paint for trim!   I just love red!!!!

The table looks adorable in the kitchen!   But now I need items for on top of the table.  So one problem solved but a new problem created!    Does this ever end?   (I hope not, I’m having too much fun!)